It is recommended that the stone be sealed with MN Stain Stop to help against
water penetration and staining. (Lasts 5-10Yrs)Maintenance for Marble, Granite & Limestone
It is recommended that the stone be sealed with MN Stain Stop to help against
water penetration and staining. (Lasts 5-10Yrs)
We advise the minimum amount of maintenance on marble and granite surfaces. It
should not be necessary to do more then wipe over with a clean damp cloth using
warm water. A mild cleaning solution such as easy care can be used on polished
or honed surfaces under no circumstances should any abrasive, acidic or bleach
type products ever be used. In addition care must be taken in using cleaning
products on adjacent areas. (i.e. glass doors, metal frames, sinks and baths
etc)
In the event that a potentially harmful liquid is spilt on the surface (i.e.
citric acid or alcohol) it is imperative that this is wiped up immediately
before it has had a chance to burn the surface. If this is not done ring marks
or splash marks will occur.
For stubborn stains wexa can be used (diluted 1:15) on polished or honed
surfaces.
For a general maintenance product MN polish can be used but it may give honed
surfaces a slight sheen.
There are many chemicals for cleaning various types of staining and the quicker
action is taken the greater the chance of removing stains.
Caution – with any cleaning or maintenance products a small area should be
tried first preferably out of view.
J & R Marble are agents for Lithofin cleaning and maintenance products.
Click on the link below to find out more about the Lithofin Products
Copyright © 1999-2004 J & R Marble Company Ltd. All rights reserved. Web page design by ThamesTech Computer Services Content Design Paul Fouracres |
|